Dynatex Red Grease is a multi-purpose lubricant that provides extra protection under extreme pressure and temperatures from 0 Degrees F to 400 Degrees F. Excellent water resistance makes it ideal for machinery operating in damp environments. Use on bearings, automotive hinges, hitches, fifth wheels, cables, pulleys and chains.
Dynatex Silicone Heat Transfer Compound is a silicone fluid based; grease-like material specially blended with thermally conductive fine metal oxide powders. This formulation results in very high thermal conductivity, low bleed, and excellent high temperature stability. This highly viscous product will not harden, melt or dry out, and will stubbornly adhere to metal surfaces even when exposed to high temperatures for extended periods of time.
Dynatex Brake System Silicone Compound is a silicone-based lubricant that protects rubber and plastic gears. Contains NO petroleum or by-products. Locks out moisture and has excellent wash away resistance. Material is unaffected by extreme temperatures from -40?F to 500?F (-40 to 260?C). Extends brake system life and stops disc brake squeal. Prevents drying and cracking. Recommended by major brake installer chains, fleets, and brake manufacturers.
Dynatex Red Anaerobic Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. It provides an instant low-pressure seal. It seals joints between rigid metal faces and flanges such as valve covers and gearbox casings. This product can be used with or without pre-cut, pre-formed gaskets.
Dynatex Copper Anti-Seize is a heavy-duty, industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt petroleum base grease. It leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam, and water exposure.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
Dynatex Brake System Silicone Compound is a silicone-based lubricant that protects rubber and plastic gears. Contains NO petroleum or by-products. Locks out moisture and has excellent wash away resistance. Material is unaffected by extreme temperatures from -40?F to 500?F (-40 to 260?C). Extends brake system life and stops disc brake squeal. Prevents drying and cracking. Recommended by major brake installer chains, fleets, and brake manufacturers.
Dynatex Green High Strength Sleevelocker is a high strength anaerobic retaining and locking adhesive, which develops extremely high strength. Because of its low viscosity and capillary action, it wicks between threads and eliminates the need to disassemble and reassemble. Ideal for cylindrical parts: may be applied to retain pulleys, gear, rotors and shafts, as well as to secure bushings, bearings and housing plugs.
Dynatex Ceramic Disc Brake Grease is a pure synthetic base oils and treated with the latest rust, oxidation and anti-wear additives to provide lasting protection against friction, wear and corrosion. It is fortified with a high concentration of a unique, high temperature ceramic boundary lubricant that will stay in place and protect at extreme temperatures from -40 Degrees F to over 3000 Degrees F. Designed to be compatible with most plastics and rubbers, especially ethylene propylene rubber (EPDM, EP or EPT) commonly used in brake caliper systems.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
Dynatex Ceramic Disc Brake Grease is a pure synthetic base oils and treated with the latest rust, oxidation and anti-wear additives to provide lasting protection against friction, wear and corrosion. It is fortified with a high concentration of a unique, high temperature ceramic boundary lubricant that will stay in place and protect at extreme temperatures from -40 Degrees F to over 3000 Degrees F. Designed to be compatible with most plastics and rubbers, especially ethylene propylene rubber (EPDM, EP or EPT) commonly used in brake caliper systems.
Dynatex Copper Anti-Seize is a heavy-duty, industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt petroleum base grease. It leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam, and water exposure.
Dynatex Aluminum Anti-Seize is a general purpose, economical industrial anti-seize and lubricating paste containing micro sized aluminum particles and graphite in a special no-melt petroleum base grease. It adheres well to metal surfaces and offers exceptional wear resistance. It can provide outstanding protection against galling, seizing and corrosion on metal surfaces even under the most extreme of heat, pressure, steam, and water exposure.
Dynatex Red Anaerobic Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. It provides an instant low-pressure seal. It seals joints between rigid metal faces and flanges such as valve covers and gearbox casings. This product can be used with or without pre-cut, pre-formed gaskets.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
Dynatex Green High Strength Sleevelocker is a high strength anaerobic retaining and locking adhesive, which develops extremely high strength. Because of its low viscosity and capillary action, it wicks between threads and eliminates the need to disassemble and reassemble. Ideal for cylindrical parts: may be applied to retain pulleys, gear, rotors and shafts, as well as to secure bushings, bearings and housing plugs.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
Dynatex Green High Strength Sleevelocker is a high strength anaerobic retaining and locking adhesive, which develops extremely high strength. Because of its low viscosity and capillary action, it wicks between threads and eliminates the need to disassemble and reassemble. Ideal for cylindrical parts: may be applied to retain pulleys, gear, rotors and shafts, as well as to secure bushings, bearings and housing plugs.
Dynatex Green High Strength Sleevelocker is a high strength anaerobic retaining and locking adhesive, which develops extremely high strength. Because of its low viscosity and capillary action, it wicks between threads and eliminates the need to disassemble and reassemble. Ideal for cylindrical parts: may be applied to retain pulleys, gear, rotors and shafts, as well as to secure bushings, bearings and housing plugs.
Dynatex Copper Anti-Seize is a heavy-duty, industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt petroleum base grease. It leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam, and water exposure.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
Dynatex Copper Anti-Seize is a heavy-duty, industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt petroleum base grease. It leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam, and water exposure.
Dynatex Silicone Sealant - Industrial Grade cures to a tough, flexible, high quality silicone rubber. They provide a durable, water-tight seal for a wide range of sealing, waterproofing applications and can be used to meet a variety of sealing needs. Fully cured they can be used for extended periods at temperatures up to 450⁰F and for shorter periods as high as 500⁰F.
Dynatex Red High Strength Threadlocker is a single component, anaerobic liquid which cures when confined in the absence of air between close fitting metal surfaces. It is designed for the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. It exhibits good temperature stability and is solvent resistant. It will lock and seal large fasteners and is used in applications where shock and vibration may cause the fastener to loosen.
