The Rapid Optimum Charger offers key advantages for Makita 18V Lithium-Ion cordless tool users. The exclusive built-in fan cools the battery (sold separately) by forcing air through the battery's air vents during the charging process for faster charging. The charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. The result is category-leading battery charge times, which means the battery spends more time working and less time sitting on the charger. (note: also charges 14.4V Lithium-Ion batteries)
Makita 18V LXT Brushless Cordless Drywall Screwdriver, High-Speed 0–4,000 RPM Motor, Push-Drive Technology for Extended Runtime, Lightweight Ergonomic Design – Tool Only. The Makita XSF03Z 18V LXT Brushless Cordless Drywall Screwdriver is engineered for fast, efficient, and high-volume drywall installation. Featuring Makita’s advanced BL Brushless Motor, this tool delivers up to 4,000 RPM, giving contractors the speed and precision needed for framing, drywall, and sheetrock applications. The brushless design optimizes energy use for longer runtime and improved overall tool life.
Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT Lithium-Ion (36-Volt) Brushless Blower (model XBU02Z, tool only). With zero emissions, lower noise and considerably less maintenance, the 18-Volt X2 (36-Volt) Cordless Blower is a welcome solution for clean-up applications. Its powered by two 18-Volt LXT batteries for 36-Volt power and run time, but without leaving the strongly-preferred 18-Volt battery platform. And with the efficient Makita BL brushless motor, the blower delivers longer run time, more power and speed and longer tool life. Makita's efficient BL brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per battery charge than similar non-brushless tools. Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. With no carbon brushes, the Makita BL Brushless motor runs cooler and more efficiently for longer life. When powered by two 18-Volt 5.0 Ah batteries (sold separately), the efficient brushless motor delivers up to 29-minutes of run-time on dial setting #3 on a single charge.
Features:
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Provides up to 50% more run time per charge compared to BL1815
Reaches full charge in 25 minutes or less
Compatible only with Star Protection tools, indicated by the Star Symbol and/or Yellow Battery Receiver under the tool
Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°F/-20°C)
Pack Includes:(1) Makita BL1820B 18V Compact Lithium-Ion 2.0Ah Battery
Features:
Variable speed (0 - 3,000 strokes per minute) combined with a 1/2" stroke length for faster and more efficient cutting
Makita exclusive dual-position on/off switch allows for either paddle or trigger switch operation
"Tool-less" blade change system allows for faster blade installation and removal for increased productivity
Compact and ergonomic design at 15-5/8" long
Built-in L.E.D. light illuminates the work area
Pack Includes:(1) Makita XRJ01Z 18V LXT Lithium-Ion Cordless Compact Reciprocating Saw
The Makita 18V LXT Lithium-Ion Cordless 2-1/2” Straight Finish Nailer, 16 Ga. (model XNB02Z, tool only) is an ideal solution for trim work, baseboard and crown molding installation, flooring and other woodworking applications. The XNB02Z is compact and powerful, and drives standard 16 gauge straight finish nails from 1” to 2-1/2” in length with a magazine capacity of up to 110 nails. Using an 18V LXT 5.0Ah battery (sold separately), the XNB02Z will drive up to 1,000 finish nails on a single charge.
The 18V LXT Lithium-Ion Cordless 2,500 RPM Screwdriver (model XSF05Z, tool only, batteries and charger sold separately) breaks new ground in high demand applications. It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. With the exclusive Push Drive Technology, the 18V 2,500 RPM Screwdriver can be set on lock-on mode so the motor starts only when the fastener is engaged. This gives contractors a quieter work environment, and also saves on battery power. It’s built for added durability with Extreme Protection Technology (XPT), which is engineered for improved dust and water resistance for operation in harsh job site conditions. It is ideal for hanging sheetrock, metal framing, installing subfloors, backer board, and decking applications.
The 18V LXT Brushless Cordless 3-1/4” Planer, AWS Capable, Tool Only (XPK02Z) is engineered for door and window installers, finish carpenters, deck installers, remodelers, and general contractors seeking a brushless cordless planer. The planer delivers 12,000 RPM for fast stock removal. It will plane up to 3-1/4” wide and 1/8” deep in a single pass. A Makita-built brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life. A 2-blade cutter head and double-edge carbide blades for added performance and a smooth finish.
The Makita Impact XPS 60 Piece Impact Bit Set (E-01644) is ideal for use with Makita high torque impact drivers and driver-drills (sold separately). The Makita Impact XPS bits are engineered to last 100X longer than standard impact bits. The Impact Bit Set features precision machined tips, pulse torsion rings, an optimized torsion zone, and unique steel that combines to deliver improved overall performance and bit life. The Impact Bits feature Optimized Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life. The bits feature a 12-sided bit collar for use with the Impact XPS Mag Boost sleeve for added holding power.
The 18V LXT Sub-Compact Brushless Hammer Driver-Drill (XPH15ZB) is an ultra-compact drilling and driving solution with significantly less weight. The 18V Sub-Compact Hammer Driver-Drill offers the size and weight of lower voltage tools, but with the performance, power, and compatibility of 18-Volt. (Bare Tool Only no Battery)
The Makita XOC02Z 18V LXT Lithium-Ion Brushless Cordless Cut-Out Tool is a high-performance solution for professional contractors and DIYers alike. Equipped with a powerful brushless motor, this cut-out tool offers superior cutting performance and longer battery life. With its AWS capability, it wirelessly connects to compatible dust extractors, helping keep your work area clean.
This cut-out tool is specifically engineered for precision and speed, making it perfect for drywall cut-outs, wood, and more. Compact and ergonomic, the XOC02Z provides enhanced user comfort and control, even during extended periods of use. Built with Makita's durable construction standards, this tool is designed to handle the rigors of jobsite conditions while delivering consistent, reliable performance.
Note: Battery and charger are sold separately; this listing is for the tool only.
The Makita DC40RC 40V MAX XGT Battery Charger is a reliable and efficient charging solution designed for Makita’s next-generation XGT cordless tool platform. Engineered for performance and durability, this charger delivers consistent power while helping extend the lifespan of your batteries. Equipped with intelligent charging technology, the DC40RC communicates directly with the battery’s built-in chip to monitor temperature, voltage, and current throughout the charging cycle. This ensures optimized performance and helps protect against overheating or overcharging.
The 40V max XGT Brushless Cordless ½” Hammer Driver-Drill (GPH01Z, tool only) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry.
The Makita 191L22-4 is the genuine USA-made replacement tie wire designed exclusively for the Makita DTR180 18V LXT cordless rebar tying tool. Each box contains 50 coils of premium 21-gauge galvanized steel wire, proudly manufactured in the United States to Makita’s exacting standards. With approximately 390 feet of wire per coil, you’ll get 120–160 ties per coil (depending on rebar diameter and tie type), meaning one box can deliver over 6,000–8,000 ties – enough for multiple large pours without stopping to reload. The high-quality galvanized finish resists rust and corrosion on the job site, while the precise wire diameter and temper ensure flawless feeding and twisting with the DTR180 tool. No jams, no weak ties, no wasted wire.
